Anti Dust N95 Mask With Exhalation Valve Foldable Universal Contour Design

About N95 masks:

❤N95 mask can isolate smaller particles, and fit tighter to the face, it is not easy to leak air from the periphery, and the filtration efficiency of particulate matter can reach 95% under standard conditions.
❤The N95 mask is not a disposable mask. In this special case (resource shortage), it can be reused. But there are conditions:
1. When n95 receives contamination such as saliva, blood, tears and other body fluids, it must be replaced
2. The user obviously feels that the breathing resistance is greater than before and must be replaced
3. Masks are damaged and must be replaced
4. It is recommended to replace it after using it 4 times.
5. However, masks cannot be reused if people go to the hospital, come into contact with an infected person, or are suspected to be infected.

5 Layers Filter function:

1. The first layer: spunbond cloth, filter the dust of micron
2. The second layer: to filter industrial pollutants, automobile exhaust, second-hand smoke pollen allergies
3. The third layer: activated carbon cloth, benzene and a smaller function of filtering dust microns
4. The fourth layer: filter density, smaller material
5. The fifth layer: Spunbond cloth, filter out all kinds of harmful substances;

​

3. Packing

The package of this fold mask with is 20pcs/box , 20box/carton and the size of the carton is 64.5*54*27cm.

4 . Certification

This product has been tested according to the following European Standard:

• EN149: 2001 +A1: 2009. Respiratory protective devices. Filtering half masks to protect against particles. Requirements, testing, marking.It complies with European Regulation (EU) 2016/425 on Personal Protective Equipment (PPE).Category III.
• EU type examination certificate (module B) issued by BSI , notified body n°0086.The PPE is subject to the conformity assessment procedure based on internal production control plus supervised product checks at random intervals set out in Annex VII under surveillance of BSI , notified body n°0086.

5 . FAQ

Q:Are you a manufacturer or a trading company?

A:We are a manufacturer located in Zhejiang,China. Welcome to visit our factory.

Q: Can you provide free samples?

A: All samples are provided freely, it will takes3-5 days to prepare the samples.

Q: How does your factory control the quality?
A: All manufacturing are absolutely base on the pre-production samples. Meanwhile, we have a complete after-sales system.

JINWEI Industry Co., Ltd is a solid company with owned factory . we also registered in Hongkong as JINWEI Industry Co.ltd . our mainland Factory is established since 2009 and located in Dongguan with 2000 square meters, we follow a strict 6S quality control management Our factory and products have a Certification of approved ISO ,CE, FDA. Welcome to visit us at any time. we focus on make Masks. Our weekly capacity is 9,000,000 pieces disposable protectctive masks and Surgical masks, 7,200,000 pieces folding masks including KN95 /N95

Also we are direct agent for manufacturers of Infrared thermometer ,body suit/uniform, hood , glove for the use of personal health care, hospital, and other industries. our partner manufacturers have combined daily capacity of 50,000 pieces hood, 500,000 pairs glove.  50000pcs Infrared thermometer . All these nearby partner manufacturers are certified with CE and FDA for their products. our QC Engineers will further conduct inspection on their goods before shipment .

With our Supreme Quality and Service, now we have customers from all over the world such as North Amercia, Europe, Asia, Africa and Middle east etc., and these customers have kept long-term cooperation with us. We hope we can work with you in the near future.